Assembly3 ConstraintMultiParallel/pl

Ta dokumentacja nie jest ukończona. Prosimy o pomoc w tworzeniu dokumentacji.

Strona Model polecenia GUI wyjaśnia jak powinny być dokumentowane polecenia. Przejrzyj stronę Category:UnfinishedDocu, aby zobaczyć więcej niekompletnych stron, takich jak ta. Zobacz stronę Category:Command Reference aby poznać wszystkie komendy.

Zobacz stronę wytycznych Wiki dla FreeCAD aby dowiedzieć się, jak edytować strony Wiki, i przejdź do strony Pomóż w rozwoju FreeCAD, aby dowiedzieć się o innych sposobach, w jakie możesz wnieść swój wkład.

Other languages:
Same orientation
Angle
Assembly3

Assembly3 ConstraintMultiParallel

Menu location
None
Workbenches
Assembly3
Default shortcut
None
Introduced in version
-
See also
None

Description

This tool builds a link between two or more objects of an assembly and matches their orientation. The selected elements of each object or more precisely their implicit coordinate systems (ICS) are used to position one object to another.

Assuming the first object is already locked in place by the Lock constraint then the following objects are moved to positions where all z-axes point in the same direction i.e. all z-axes are parallel.

The offset of their origins in x-, y- and z-direction and the angles between the x-axes (and y-axes as well) are not defined. Related to the first object the following objects can still move along the x-, y- and z-axis and spin around the z-axis. This is leaving 4 degrees of freedom (DOFs) for each link unconstrained.

The constraint accepts straight edges and planar faces, which become parallel.

Usage

  1. Place two or more objects into an assembly.
  2. Select one straight edge element or one planar face element of each object.
  3. Press the Multi parallel button.


Same orientation
Angle
Assembly3
Centrum użytkownika